|
First Start out by removing the bumper support,
the passenger side head light, and air filter
assembly.
Second Make the inlet
openings. You'll want to pain these as the bumper is a yellow
color, I used black along the top and the body color on the
sides and bottom.
Third Make room
for the air duct hose
Fourth Enlarge the inlet to
allow the hose to pass through
Fifth Put the bumper
support brackets back on and the hose. Determine a good spot to cut
the hose, making sure you can fit it with the head light in
position.
Sixth Make sure any cut metal gets a coat of paint (from a
touch up bottle is fine), to prevent rust. Put the head light
back in.
|
|
